Lighting Installation
in Brampton, ON

Switching from incandescent or halogen to LED is one of the simplest ways to reduce your electricity bill. LED bulbs use 75% less energy, last 15-25 times longer, produce 90% less heat (safer and cooler in summer), and deliver brighter, more consistent light.

For a typical Brampton home, switching all fixtures to LED can save $200-$400 per year on hydro costs.

Smart lighting lets you control every light in your home from your phone or voice assistant. We install smart switches and dimmers compatible with Alexa, Google Home, and Apple HomeKit.

Set schedules, create scenes, control lights remotely, and even sync lighting with your home security system. Smart switches replace standard switches, so no special bulbs are required.

Outdoor lighting serves two purposes: safety and curb appeal. We install pathway lights, security flood lights, deck and patio lighting, accent lighting for landscaping, and motion-activated lights for driveways and entries.

All outdoor installations use weatherproof fixtures rated for Ontario winters.

A homeowner in Brampton's Heart Lake area wanted to upgrade all the lighting in their home before selling. We replaced 24 old incandescent ceiling fixtures with modern LED flush mounts throughout the main floor and bedrooms, swapped out the dining room chandelier, and added under-cabinet LED strips in the kitchen.

The entire job took one day.

A Mississauga homeowner near Port Credit had an outdoor patio with no lighting and a backyard they could not use after dark. We installed four weatherproof LED flood lights on a motion sensor, two post lights along the path to the garage, and string-light-style patio outlets on a dedicated outdoor circuit.

All wiring was run underground in conduit.

A Brampton homeowner in Springdale wanted smart lighting throughout their main floor. We installed Lutron Caseta smart dimmers in six rooms, set up the bridge, and verified compatibility with their Google Home setup.

Every light in the living room, kitchen, and dining room is now controllable from their phone or voice.

A Vaughan homeowner was redoing their basement and wanted accent lighting above a built-in bookcase plus task lighting over a workbench. We installed LED strip lights with a controller behind the crown moulding for the bookcase and two dedicated LED shop lights above the bench - all on one switched circuit.

Not all LED light is the same. Two bulbs can be the same wattage and brightness but look completely different because of their colour temperature and CRI rating.

Understanding these two numbers helps you get lighting that actually feels right in your home.

Colour temperature is measured in Kelvin (K). Lower numbers are warmer (more yellow-orange), higher numbers are cooler (more blue-white).

For bedrooms and living rooms, 2700K warm white creates a cozy, relaxed atmosphere close to incandescent. For kitchens, 3000K to 3500K neutral white is the most popular choice - bright without feeling clinical.

For garages, workshops, and task areas, 4000K to 5000K daylight gives maximum visibility with a crisp, clear tone.

CRI (Colour Rendering Index) measures how accurately a light source renders colour compared to natural daylight. A CRI of 100 is perfect daylight.

For most homes, a CRI of 90 or above is what we recommend. Low-CRI lighting (under 80) makes everything look flat and washed out - you may not notice it immediately, but skin tones look off and food loses its appeal under it.

When we quote a lighting installation, we discuss Kelvin and CRI with you for each room and select fixtures accordingly. It is a small detail that makes a big difference in how your home feels.